| Model: | Below 100-44D DAMPA Clip-In Custom Cassette |
| Size: | 600 |
| mA/W: | Standard - 12W |
| Optics: | Glare Control |
| Ra / Kelvin: | Ra90 – 3000K / 4000K – Option: Ra80 |
| Assembly: | Recessed |
| IP / IK: | IP20 / IK05 |
| Colour: | Luminaire housing standard – RAL9016 / RAL9005 / RAL9006 |
| Material: | Aluminium |
| IEC62717 (L80B10): | 100,000h at ta 25 degrees |
| Connection: | Direct |
| Steering: | DALI |
| Starting current / Leakage current: | 8.4A peak – 170µs / 0.61mA |
| Standby power: | <0.5W |
| Flicker-free: | Pst LM: 0.015 / SVM: 0.001 |
| Fuse C10: | 39 per fuse |
| Luminous flux: | 1616lm / 1667lm |
| Model: | Below 100-44D DAMPA Clip-In Custom Cassette |
| Size: | 900 |
| mA/W: | Standard - 15W |
| Optics: | Glare Control |
| Ra / Kelvin: | Ra90 – 3000K / 4000K – Option: Ra80 |
| Assembly: | Recessed |
| IP / IK: | IP20 / IK05 |
| Colour: | Luminaire housing standard – RAL9016 / RAL9005 / RAL9006 |
| Material: | Aluminium |
| IEC62717 (L80B10): | 100,000h at ta 25 degrees |
| Connection: | Direct |
| Steering: | DALI |
| Starting current / Leakage current: | 8.4A peak – 170µs / 0.61mA |
| Standby power: | <0.5W |
| Flicker-free: | Pst LM: 0.015 / SVM: 0.001 |
| Fuse C10: | 39 per fuse |
| Luminous flux: | 2055lm / 2119lm |
| Model: | Below 100-44D DAMPA Clip-In Custom Cassette |
| Size: | 1200 |
| mA/W: | Standard - 20W |
| Optics: | Glare Control |
| Ra / Kelvin: | Ra90 – 3000K / 4000K – Option: Ra80 |
| Assembly: | Recessed |
| IP / IK: | IP20 / IK05 |
| Colour: | Luminaire housing standard – RAL9016 / RAL9005 / RAL9006 |
| Material: | Aluminium |
| IEC62717 (L80B10): | 100,000h at ta 25 degrees |
| Connection: | Direct |
| Steering: | DALI |
| Starting current / Leakage current: | 8.4A peak – 170µs / 0.61mA |
| Standby power: | <0.5W |
| Flicker-free: | Pst LM: 0.015 / SVM: 0.001 |
| Fuse C10: | 39 per fuse |
| Luminous flux: | 2779lm / 2865lm |
*Inserts / shock mounts / suspensions
The Below 100-44D profile is developed for the DAMPA Clip-In Custom Cassette. The Below profile utilises the gap between the top layer of carrier rails and the underside of the ceiling cassette. The angled sides of the Below profile allow the bottom layer of the support system to be installed according to standard DAMPA instructions. When using Below 100-44D, an extra support rail is added along the length of the profile. The support system remains intact and can be finalised before the Below profile is installed. The Below profile can be continuous throughout the ceiling construction or as single units. The Below profile is suspended directly from the support system or on suspension brackets mounted in the ceiling. Below 100-44D is placed on the wall directly in the edge moulding or according to instructions for other edge solutions.
79° beam angle
Below profile 1200 DAMPA Clip-In Custom Cassette
Below_100-44D_DAMPA_Clip_In_1200
DAMPA Clip-In Custom Cassette
Microprismatic shielding
Standard RAL9016
Carrying bracket and strap
Below profile 4200 DAMPA Clip-In Custom Cassette
Below_100-44D_DAMPA_Clip_In_4200
DAMPA Clip-In Custom Cassette
Microprismatic shielding
Standard RAL9016
Carrying bracket and strap
Below profile 1800 DAMPA Clip-In Custom Cassette
Below_100-44D_DAMPA_Clip_In_1800
DAMPA Clip-In Custom Cassette
Microprismatic shielding
Standard RAL9016
Carrying bracket and strap
Below profile 4800 DAMPA Clip-In Custom Cassette
Below_100-44D_DAMPA_Clip_In_4800
DAMPA Clip-In Custom Cassette
Microprismatic shielding
Standard RAL9016
Carrying bracket and strap
Below profile 2400 DAMPA Clip-In Custom Cassette
Below_100-44D_DAMPA_Clip_In_2400
DAMPA Clip-In Custom Cassette
Microprismatic shielding
Standard RAL9016
Carrying bracket and strap
Below profile 5400 DAMPA Clip-In Custom Cassette
Below_100-44D_DAMPA_Clip_In_5400
DAMPA Clip-In Custom Cassette
Microprismatic shielding
Standard RAL9016
Carrying bracket and strap
Below profile 3000 DAMPA Clip-In Custom Cassette
Below_100-44D_DAMPA_Clip_In_3000
DAMPA Clip-In Custom Cassette
Microprismatic shielding
Standard RAL9016
Carrying bracket and strap
Below profile 6000 DAMPA Clip-In Custom Cassette
Below_100-44D_DAMPA_Clip_In_6000
DAMPA Clip-In Custom Cassette
Microprismatic shielding
Standard RAL9016
Carrying bracket and strap
Below profile 3600 DAMPA Clip-In Custom Cassette
Below_100-44D_DAMPA_Clip_In_3600
DAMPA Clip-In Custom Cassette
Microprismatic shielding
Standard RAL9016
Carrying bracket and strap
Below is a closed line profile where there is great freedom for the placement of technical components such as spots, sprinklers, emergency lights, PIR sensors and detectors. Description of brands and placement is done in collaboration with the planning architects and consulting engineers Description of brands and placement is done in collaboration with electrical installers, planning architects or consulting engineers. At Teamtronic, we have put together various kits that can easily be combined according to needs and wishes. If you request kits that are not part of our standard kits, we will find a solution.
